Hotdisplay Technology Co., Ltd
 | What Is COG LCD Technology?In a COG display, the driver IC is mounted directly onto the LCD glass through a specialized bonding process. Electrical connections are routed through the display structure, often using a flexible printed circuit or a compatible connection arrangement. The design can reduce the space occupied by separate driver electronics. However, COG describes the IC mounting architecture, not a specific LCD optical technology or communication protocol. A COG LCD may still require a host controller, suitable power circuitry and an interface compatible with the selected driver IC. |
Directly bonding the driver IC to the glass can reduce the need for a separate driver PCB, supporting space-constrained product designs.
COG LCD modules can be suitable for battery-powered equipment and embedded instruments. Actual power consumption depends on the LCD technology, driver, operating voltage, refresh behavior and backlight.
Graphic COG modules can display pixel-based text, icons, measurement results and simple graphics. The available layout depends on the selected resolution and controller.
HOTDISPLAY's published COG information describes adapter-board options that can convert an FPC connection to pin headers or cable connectors. Relevant modules may also be available in PCB-mounted configurations with a controller and backlight through the graphic LCD product range.
The appropriate configuration must be confirmed for the specific product.
COG and COB describe different ways of assembling display electronics.
COG (Chip-on-Glass): The driver IC is bonded directly to the LCD glass, helping reduce the separate PCB footprint.
COB (Chip-on-Board): The IC is mounted on a printed circuit board, commonly used in character LCD modules and some graphic LCD assemblies.
COG can be attractive when thickness and compact integration are priorities. COB may be appropriate when a more conventional PCB-based module and connection structure better suit the application.
Neither structure is automatically better for every design; compare dimensions, electrical requirements, cost and assembly needs.
HOTDISPLAY's published product range includes COG LCD modules with resolutions such as:
128×64: A compact graphic format for status information, icons and menus.
132×64: An alternative monochrome graphic format for embedded interfaces.
240×160: A higher-resolution option for more detailed monochrome layouts.
320×240: A larger graphic format available within the broader COG/graphic LCD product offering, subject to the specific module configuration.
The existing catalogue includes examples using controllers such as ST7567. The driver IC, interface, voltage, dimensions and display technology must be checked individually rather than assumed from the resolution alone.
Use compact monochrome displays to present measurements, operating status and menu information.
Integrate thin display modules into portable or space-constrained instruments, subject to the product's optical, electrical and environmental requirements.
Display status, parameters and operating information in control devices where a compact interface is required.
Support compact products that need a low-profile display with custom text or graphic content.
Determine whether the screen will show fixed information, custom icons, measurement results or more complex monochrome graphics.
Confirm the driver IC, communication interface, initialization requirements, logic voltage and host compatibility. A matching resolution does not guarantee electrical compatibility.
Check the FPC dimensions, contact pitch, pinout, cable orientation and connection method. If direct connection is inconvenient, ask whether a compatible adapter board or connector arrangement is available.
Confirm whether the module requires a backlight, which backlight options are available and whether the optical characteristics meet the intended lighting environment.
Check overall dimensions, thickness, viewing area, operating temperature, mounting arrangement and the protection provided by the finished enclosure.
No. COG describes how the driver IC is mounted. The module may contain a driver IC, but the host system still needs to communicate with it using a supported interface and control sequence.
No. COG is an assembly technology, not a display-content category. COG products can use different LCD formats and capabilities. Confirm the exact module specification.
It can when the microcontroller supports the module's interface, voltage levels, timing and required initialization. Some designs may need an adapter board or additional circuitry.
The published COG range describes adapter-board options for selected products, including conversion from FPC to pin headers or cable connections. Confirm feasibility for the chosen module.
Not automatically. The COG structure can reduce component footprint, but power depends on the driver, LCD technology, voltage, display operation and backlight.
A replacement must match more than the outline dimensions. Check the driver IC, resolution, interface, pinout, voltage, initialization sequence, viewing area and mechanical structure.
Provide the target resolution, outline dimensions, FPC drawing, driver or interface requirements, backlight preference, operating temperature and estimated quantity.
HOTDISPLAY provides COG LCD product options and integration configurations for compact electronic products.
Send your existing module datasheet or target specifications to evaluate compatibility, connection options and the most suitable display configuration.
What did our happy clients say?